Flying-Hobby
FULLSIZE SILVERLINE V-BAR V 5.3 FLYBARLESS STABILIZATION SYSTEM
| Features | Auto-Learn Function |
| Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
| http | //www.vstabi.info/en |
| http | //www.mikado-heli.com.hk/ |
V-Bar Overview:, Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (V-Bar). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!), Highlights:, Digital flight performance - like a simulator, Contents:, Full Size Silverline V-Bar, Important Information:, Support site:, Version 5.3 Pro software is available for purchase and download here:,
MIK4608 Fullsize Silverline V-Bar V 5.3 Flybarless Stabilization System The ...Flying-Hobby
MIKADO VBAR "BLUELINE" 5.2 EXPRESS
| Contents | • Full Size V-Bar |
| • Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
V-Bar Overview:, Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (“V-Bar”). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!), Features:, • Auto-Learn Function, Highlights:, • Digital flight performance - like a simulator,
• Preset parameters for many common helicopters • Programming via ...Flying-Hobby
TAIL ROTOR BLADE/NEW
Instruction:, New tail blade features precision center of gravity and efficient wing design, this blade ensures the lock of the tail when reversing in high speed, better resistance to the wind! The tail reverse torque makes the rotation more smooth, the angle and action of the 4 point tic tock are more pricise., Specification:, Tail rotor blade x 4,
Flying-Hobby
T-REX 450PRO DFC COMBO
| Instructions | (T-REX 450PRO DFC) |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
● New removable main shaft block and servo mounting block ...Flying-Hobby
T-REX 450PRO DFC SUPER COMBO + FREE APLUS 65C LIPO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Combo Included:, ●T-REX 450 PRO DFC Kit X 1 set, Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., 3GX Programmable Flybarless System :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
●3GX Flybarless System X 1 set ●325D 3G Carbon blades ...Flying-Hobby
T-REX 450PRO DFC SUPER COMBO (WITH 3GX) + 4 RJX FBL BLADES
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., (3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
T-REX 450PRO DFC Super Combo (With 3GX) 1 RCE-BL35P 35A ...Flying-Hobby
T-REX 450PRO DFC SUPER COMBO (WITH 3GX)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Instructions | (T-REX 450PRO DFC) |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
●3GX is currently the smallest and lightest flybarless system on ...Flying-Hobby
T-REX 450PRO DFC (WITH 3GX) + FREE EXPRESS COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Instructions | (T-REX 450PRO DFC) |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
Free Express Shipping ●3GX is currently the smallest and lightest ...Flying-Hobby
T-REX 700E DFC SUPER COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1345mm |
| ● Height | 360mm |
| ● Width | 208mm |
| ● Main Blade Length | 690mm |
| ● Main Rotor Diameter | 1562mm |
| ● Tail Rotor Diameter | 281mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 104T |
| ● Tail Drive Gear | 22T |
| ● Weight(With Motor) | 2900g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 700E DFC) :, ● Drive Gear Ratio: 1:9.33:4.37, Specification(T-REX 700E DFC) :, , Features:, 1. Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed., Accessories:, ●T-REX 700E DFC Kits Set x 1set, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
●3GX is currently the smallest and lightest flybarless system on ...Flying-Hobby
DEAL - T-REX 700E DFC SUPER COMBO (FREE SHIPPING)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1345mm |
| ● Height | 360mm |
| ● Width | 208mm |
| ● Main Blade Length | 690mm |
| ● Main Rotor Diameter | 1562mm |
| ● Tail Rotor Diameter | 281mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 104T |
| ● Tail Drive Gear | 22T |
| ● Weight(With Motor) | 2900g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 700E DFC) :, ● Drive Gear Ratio: 1:9.33:4.37, Specification(T-REX 700E DFC) :, , Features:, 1. Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed., Accessories:, ●T-REX 700E DFC Kits Set x 1set, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
●3GX is currently the smallest and lightest flybarless system on ...Flying-Hobby
KDE DIRECT 450XF-3500 HP BRUSHLESS MOTOR, 3500KV (450-CLASS)
| Maximum Power | 1,200+ W |
| Continuous Power | 725+ W |
| Maximum Efficiency | 90% |
| Optimized Voltage | 11.1 V (3S) |
| Io (@10V) | 3.6 A |
| Rm (Wind Resistance) | 0.009 Ω |
| Magnetic Poles | 8, 12S8P |
| Bearings | Quad, 696ZZ/MR106ZZ |
| Stator Class | 2618, 2D |
| Shaft Length | 18.5mm |
| Motor Diameter | 33mm |
| Motor Length | 36mm |
| Connectors | 4.0mm, 24k Bullets |
| ESC PWM Rate | 12 - 16 KHz |
Specifications:, Kv:3,500 rpm/V, Voltage Range:, 11.1 V (3S) - 14.8 V (4S), Mount Pattern:, M3 x 19mm, M2.5 x 16mm, Shaft Diameter:, 3.5mm (4mm Internal), Motor Weight:, 105 g (115 g with Wires/Bullets), Cooling System:, High-Volume Radial Fan,
This is the KDE Direct 450XF-3500 High Performance Brushless 450 ...Flying-Hobby
450 AUTOROTATION TAIL DRIVE GEAR-WHITE
| ●Weight | 8.5g/pcs |
Instruction:, ●This new main gear is great for the balance. New super strength plastic-steel material, multinational patent design, light weight, and special cooling blade design is good for lowering the temperature of electronic equipment and motors. It can efficiently increase the wind flow., Specification:, ●Autorotation tail drive gear(106T) x 1,
●Use for T-REX450 XL/CF/SE/S(tail drive gear 25T)/450 Pro.Flying-Hobby
T-REX 500 PRO DFC COMBO
| ● Length | 868mm |
| ● Height | 275mm |
| ● Main Blade Length | 425mm |
| ● Main Rotor Diameter | 978mm |
| ● Tail Rotor Diameter | 206mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 134T |
| ● Autorotation Tail Drive Gear | 145T |
| ● Tail Drive Gear | 36T |
| ● Weight(With Motor) | 1210g |
Remark :, All T-REX 500 DFC Combo have change to this canopy -, Specification(T-REX 500 PRO DFC) :, ●Features, Specification(T-REX 500 PRO DFC) :, ● Drive Gear Ratio: 1:11.17:4.03, Accessories:, ●T-REX 500PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
HC5112 ●Equipped with the low CG DFC rotor head, effectively ...Flying-Hobby
800 CARBON FIBER BLADES
| ●Shape | Symmetrical wing |
| ●Length | 800x70x8.8mm |
| ●Width | 14mm |
| ●Shaft Diameter | 5mm |
| ●Weight | Appro 445g/set |
Instruction:, ●Use for T-REX 700N / 700E / 700E F3C upgarde , must with 800 Upgrade Tail Assembly(, Specification:,
H80001 ). ●For superior stability and resistant to wind gusts.Flying-Hobby
600D 3G CARBON FIBER BLADES (H60196)
| ●Shape | Symmetrical wing |
| ●Length | 600x55x7.5mm |
| ●Width | 12mm |
| ●Shaft Diameter | 4mm |
| ●Weight | 265g/set |
Instruction:, ●Use for T-REX 600 3G Flybaless System., Specification:,
●3G carbon main blades with CG shifted outwards, and slight ...